Price:
Sale price$17.15 USD Regular price$32.99 USD

Flo N Go

Save $15.84

Reviews

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John Woolfrey
For melting in clearcoat wet-edge when blending clearcoat

This product doesn't have a TDS sheet at the time of this review. Flo N Go does come with a printed label with simple instructions. For small repairs you may not want to apply clear coat to the entire panel. After your basecoat has been blended past your repair you spray your first coat of clearcoat just past the edge of the basecoat (or however far you want to take the clear). Your second coat of clearcoat will be applied to end a few inches past the edge of the first coat of clearcoat. After the second coat of clear (your last coat) is applied, you apply this Flo N Go blender to the wet edge of the clear. You need to mist it on and overlap the clearcoat wet edge and the old sanded clear. It will cause the clearcoat to run if you apply the Flo N Go wet. If applied wet it may also cause the clearcoat to have a fish-eye look. Flo N Go must be misted on just enough to help the wet edge flow out and flatten. It must also be applied only to your final coat of clear. If it's applied to the wet edge of the first coat of clear, when you apply your second coat of clear that second coat will fish-eye over the area where the previous Flo N Go blender was applied. This product works well if it is used properly. Apply it only as a dry mist coat. Dial down your gun fan size, the gun pressure and back off the trigger adjustment screw so barely any fluid flows out. I use a small touch-up gun with a 0.8mm or 1mm tip.

Estimate shipping

Tamco Paint's shipping fees are "real time rates" meaning, we charge you what it costs to ship depending on what you ordered and where it is shipping. That said, we offer free shipping to the lower 48 states in the USA if your order is $500+!

Please keep in mind, we DO NOT guarantee delivery transit times. The shipping companies include "Estimated Delivery Times" which are estimates and should be treated as such. Also Tamco Paint will NOT refund for late deliveries, delayed transit, or any other wait due to the shipping and handling involved.

If you forgot an item, we will not ship the rest for free. Send us a message on our on-site Chat by clicking the chat bubble in the bottom right to add onto your order. We usually can help make that happen if your order hasn't been packaged up yet.

Under normal circumstances, ship the next day (M-F , some holidays change this as well). If you order early AM or early afternoon, we will most likely be able to get your order out that day! CALL for order changes!! (please note we do not ship the next day for mixed paint.) 

We use Fedex & UPS and USPS (for non-hazardous products). Orders that reach "Free shipping" will be chosen by Tamco Paint.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John Woolfrey
For melting in clearcoat wet-edge when blending clearcoat

This product doesn't have a TDS sheet at the time of this review. Flo N Go does come with a printed label with simple instructions. For small repairs you may not want to apply clear coat to the entire panel. After your basecoat has been blended past your repair you spray your first coat of clearcoat just past the edge of the basecoat (or however far you want to take the clear). Your second coat of clearcoat will be applied to end a few inches past the edge of the first coat of clearcoat. After the second coat of clear (your last coat) is applied, you apply this Flo N Go blender to the wet edge of the clear. You need to mist it on and overlap the clearcoat wet edge and the old sanded clear. It will cause the clearcoat to run if you apply the Flo N Go wet. If applied wet it may also cause the clearcoat to have a fish-eye look. Flo N Go must be misted on just enough to help the wet edge flow out and flatten. It must also be applied only to your final coat of clear. If it's applied to the wet edge of the first coat of clear, when you apply your second coat of clear that second coat will fish-eye over the area where the previous Flo N Go blender was applied. This product works well if it is used properly. Apply it only as a dry mist coat. Dial down your gun fan size, the gun pressure and back off the trigger adjustment screw so barely any fluid flows out. I use a small touch-up gun with a 0.8mm or 1mm tip.