The parts of a motorcycle are just as important as the motorcycle itself, after all, how will the bike run if it wasn’t made up of the components that would get it to start and run. So Justin Willson thought that the best way to start taking care of his motorcycle’s parts was to use his artistic skills and repaint them.
To design them, Justin used 3 coats of Violette Candy Concentrate and 3 coats of Teal Time Candy Concentrate. Both these colors blended well together as the results were attractive and aesthetically pleasing to the eyes.
To further protect the bike’s bits and pieces, he used the HC895 Intercoat & Clearcoat and added 3 coats of HC2104 High Solids Clearcoat as the finishing touches. The bike’s components suddenly became more lively and happy, as compared to the old rundown dull. It’s perfect when you want to make it look pretty and solid at the same time.
Painter: Justin Wilson
Shop IG: vc.designed
Tamco Products used for this look:
- Violette Candy Concentrate ( 3 coats )
- Teal Time Candy Concentrate ( 3 coats )
- HC895 Intercoat & Clearcoat
- HC2104 High Solids Clearcoat ( 3 coats )
Optional but recommended Tamco Paint products:
- Paint Remover
- HR397 Wax & Grease Remover
- HR397W Waterbourne Wax & Grease Remover
- HR398 Final Wipe
- Polyester Paste
- High Build Epoxy Primer Series Kit
- DTA (Direct to Anything) Epoxy Primer
- DTM (Direct to Metal) Primer
- Forever Seal
- Slick Silver Metallic
- HR Reducers
- HH57 Basecoat Hardener
- CC3000 Candy Carrier
- Flo N Go
- Tamco T-Cups - Spray gun cup liner system
-
Finishing & Detailing
Don't forget to follow us and subscribe!
Facebook: Tamco Paint Youtube: TamcoPaintYT
Instagram: @tamcopaint Tiktok: TamcoPaint
Join our Facebook Group Community to learn more about our products and share your project with us!
Facebook Group: Tamco Paint Automotive 411