Sam Ellington, the talented painter behind this remarkable 1997 Ford Mustang SVT Cobra refinish project, has once again demonstrated his exceptional craftsmanship. Partnering with Tamco Paint, Ellington utilized their HP5312 White DTM (Direct to Metal) Primer Kit, Basecoat Factory Packs (HB9900 Jet Black) for Strips, Basecoat Factory Packs (HB9901 Bright White) for base color, and HC2104 High Solids Clearcoat to transform the Cobra into a flawless work of art. Meticulous block sanding, starting from 600 grit and progressing to 5000 grit guided by a coat of guide paint, prepared the surface for perfection. Sam then expertly buffed the finish to a mirror-like shine using CSI pads and compound. The collaboration between Sam and Tamco Paint has resulted in an automotive masterpiece that sets the standard for exceptional craftsmanship and attention to detail.
Painter: Sam Ellington
Tamco Products used for this look:
- HP5312 White DTM (Direct to Metal) Primer Kit
- Basecoat Factory Packs (HB9901 Bright White)
- Basecoat Factory Packs (HB9900 Jet Black)
- HR Reducers
- HC2104 High Solids Clearcoat
- Paint Strainers
- Wooden Mixing Sticks
Optional but recommended Tamco Paint products:
- Paint Remover
- HR397 or HR397W Waterbourne Wax & Grease Remover
- HR398 Final Wipe
- Polyester Paste
- High Build Epoxy Primer Series Kit
- DTA Epoxy Primer
- Forever Seal
- HH57 Basecoat Hardener
- Flo N Go
- Tamco T-Cups - Spray gun cup liner system
- Finishing & Detailing
Don't forget to follow us and subscribe!
Facebook: Tamco Paint Youtube: TamcoPaintYT
Instagram: @tamcopaint Tiktok: TamcoPaint
Join our Facebook Group Community to learn more about our products and share your project with us!
Facebook Group: Tamco Paint Automotive 411