Matt Thurber customized a motorcycle and the result was a transformation to die for. The use of the paint products was careful and precise, it was a genius plan to partner up with Tamco Paint products.
Its look was achieved thanks to a Ground Up makeover. First, Matt ensured a clean surface, one that is free from contaminants, and that’s why he chose to use the HR397W Waterbourne Wax & Grease Remover as well as the HR398 Final Wipe. Then came the HP771 Grey High Build Epoxy Primer Kit and Forever Seal to create a foundation that was flawless. After that, he applied 3 coats of Rock-It-Red, this was to give off a look to impress. Then, he added 3 coats of the HC4100 Glamour Clearcoat Kit. But Matt did not stop there. In fact, he added 5 more coats of the clearcoat to achieve the maximum, top-notch appearance he can get.
For a more efficient application he used the Tamco T-Cups - Spray gun cup liner system.
This jaw-dropping sensation has gotten countless of attention. And thanks to Matt and Tamco Paint, countless is just the beginning.
Painter: Matt Thurber
Tamco Products used for this look:
- HR397W Waterbourne Wax & Grease Remover
-
HR398 Final Wipe
- HP771 Grey High Build Epoxy Primer Kit
- Forever Seal
-
Rock-It-Red (3 Coats)
- HR Reducers
- HH57 Basecoat Hardener
- HC4100 Glamour Clearcoat Kit ( 8 Coats Total )
- Tamco T-Cups - Spray gun cup liner system
Optional but recommended Tamco Paint products:
- Paint Remover
- HR397 Wax & Grease Remover
- Polyester Paste
- DTA (Direct to Anything) Epoxy Primer
- DTM (Direct to Metal) Primer
- Flo N Go
- Finishing & Detailing
Don't forget to follow us and subscribe!
Facebook: Tamco Paint Youtube: TamcoPaintYT
Instagram: @tamcopaint Tiktok: TamcoPaint
Join our Facebook Group Community to learn more about our products and share your project with us!
Facebook Group: Tamco Paint Automotive 411