Eric Puglia with Puglia Custom Design did the unthinkable when transforming this motorcycle to a show-worthy piece. Using the blazing color of Tamco Paint’s Rock-It-Red, the result was undeniably worth sharing.
He started with using the combination of HR397W Waterbourne Wax & Grease Remover and HR398 Final Wipe to create a clean surface for the layers to come. Then, to create a good adhesion, he used HP5311 Black DTM Primer before applying three coats of Rock-It-Red, making sure that the boldness of color stands out. For the motorcycle to be ready for adventures, he then applied a good amount of five coats for HC2104 High Solids Clearcoat, not only keeping the paintwork glossy, but also serves as a thick layer of protection for more durability.
This rocking red color is likely to make the motorcycle a crowd favorite, with a sickest look even in day or at night.
Painter: Eric Puglia
Shop Name: Puglia Custom Design
Tamco Products used for this look:
- HR397W Waterbourne Wax & Grease Remover
- HR398 Final Wipe
- HP5311 Black DTM (Direct to Metal) Primer Kit
- Rock-It-Red ( 3 coats over black )
- HR Reducers
- HC2104 High Solids Clearcoat Kit ( 5 total coats )
Optional but recommended Tamco Paint products:
- Paint Remover
- HR397 Wax & Grease Remover
- Polyester Paste
- High Build Epoxy Primer Series Kit
- DTA Epoxy Primer
- HH57 Basecoat Hardener
- Flo N Go
- Tamco T-Cups - Spray gun cup liner system
- Finishing & Detailing
Don't forget to follow us and subscribe!
Facebook: Tamco Paint Youtube: TamcoPaintYT
Instagram: @tamcopaint Tiktok: TamcoPaint
Join our Facebook Group Community to learn more about our products and share your project with us!
Facebook Group: Tamco Paint Automotive 411